Our website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish.

Amplificador 2 W Bi-Direccional APC b/g Exterior

Amplificador 2 W Bi-Direccional APC b/g (EXTERIOR)

More details

New product

364,64 €tax excl.

441,21 € ( IVA Incluido )
The stock of this article is reserved or is minimal. You can buy it, but we will confirm the final availability when processing the order. (max 24 hs)

- +

Add to compare

More info

L-com / Hyperlink Tech HA2402GX-NF


  • Transmit Power: 2 Watt (33 dBm)
  • Receive Gain: 20 dB nom
  • Frequency: 2400 - 2500 MHz
  • Max. Input Power: 100 mW (20 dBm)
  • Water Resitant Rating (Outdoor Models): IEC 60529 IPX7
  • Operating Mode: 
    • Bi-directional, half-duplex Time Division Duplex. Senses RF Carrier from transmitter and automatically switches from receive to transmit mode
  • Operating temperature: 
    • -40ºC to 50ºC
    • -40ºF to 122ºF
  • Dimensions:
    • 5.9 x 2.5 x 1.3 (inches)
    • 150 x 64 x 33 (mm)
  • Weight:
    • 0.95 Lbs 
    • 0.44 Kg
  • Current Draw: 1.25A Peak Tx and 0.14A Peak Rx
  • Supply Voltage: 12 VDC -0.5V / +1V

HyperAmp® HA2402GX-NF amplifiers are compatible with 802.11g (b/g) wireless LAN equipment. Hyperlink´s Active Power Control circuit automatically adjusts the amplifier´s gain to provide a constant output power regardless of cable length.

The HyperAmp® HA2402GX series improves range by delivering full transmit power directly at the antenna where it is most effective. In addition the unit´s receive gain compensates for cable losses. The unit can be configured to deliver the full transmit power with as little as 1mW of input power, permitting cable runs fo sveral hundred feet with no degradation in operating range.

Streaming Media Ready

WiFi conmponents used in a Streaming video or Audio system work harder than ones carrying Data only. They are turned on for extended periods of time without the chance to cool off. Microwace devices are very sensitive to the geat generated conten for extended periods of time without overheating. Some products were designed for Data only use and have no method of heatsinking. If you use them in a Streaming Media system, those products will self festruct or have their lifespan diminished.It would be the equvalent removing te heatsink of fans from you PC.

Hyperlink Technologies "Streaming Media Ready" amplifiers (see chart above for models) were designed form the start to survive the extreme conditions that Streaming Media imposes on a amplifier. Using proprietary heatsinking techniques Hyperlink´s Streaming Media amplifiers will remain at safe operating temperatures for the most demanding Streaming media applications, without the need for cumbersome heatsink plates, fins or fans. 

Outdoor Model

The HA2402GX models feature rugged, cast aluminum weather-proof construction to ensure years of reliable operation in the harshest environments. The integral mast mount gives this amplifier superior strengh as well as simplifies installation. Included with the outdoor models, the DC Power Injector provides power to the HyperAmp through the antenna cable, simplifying installation. Current-sensing circuits provide remote amplifier diagnostic LEDs. In addition, the unit provides effective lightning protection with multi-strike capability.

Power Supply

The power supply included with the amplifier is rated at 100-240 VAC @ 50/60 Hz allowing it to be used i n the US as well EU when  used with the optional PSX-EU2 Plug converter (US NEMA 6-15R Flat Blades to EU 4/4.48 mm rounds pins)

Applications for the 2 Watt 2.4 GHz 802.11b/g Outdoor Amplifier product

  • 2.4 GHz ISM Band Applications
  • 802.11b and 802.11g WiFi Wireless LAN 
  • Public Wireless Hotspot

7 other products in the same category:

Compare 0