Home

2.4 GHz 5 dBi Rubber Duck Antenna - N-Male Connector

Reference: HG2405RD-NM

€57.35 (tax incl.)

A flexible omnidirectional antenna for the 2.4 GHz band, with an N-Male connector. Its 8.3-inch body and tilt-and-swivel joint allow adjustable positioning.

Type N Male Crimp for 100-Series Cable

Reference: ANM-1114

€5.20 (tax incl.)

This straight 50 Ω N-male connector uses a crimp termination for 100-series cables. It has a gold-plated center contact and supports RG316, RG174, RG188, WBC100, LMR100A and Belden 7805.

Type N Male Crimp for RG58,195-Series Cable

Reference: ANM-1700

€17.85 (tax incl.)

The ANM-1700 is a straight N-male crimp connector for RG58 and 195-series cable. Its specifications state standard polarity, 50 Ω impedance and DC to 6 GHz operation.

Type N Male Crimp for 240-Series Cable

Reference: ANM-1508

€15.43 (tax incl.)

The ANM-1508 is a straight N-male crimp connector for 240-series cable. It has a gold-plated contact and is specified for 50 Ω and DC to 6 GHz operation.

Type N Male Crimp for RG8, 400-Series Cable

Reference: ANM-1406

€20.45 (tax incl.)

The ANM-1406 is a straight 50 Ω N-male connector with a crimp termination. It has a nickel-plated brass body and supports RG8 and several 400-series cable references.

Type N Male Crimp for 600-Series Cable

Reference: ANM-1610

€27.53 (tax incl.)

This straight 50 Ω N-male connector has a crimp termination and a gold-plated center pin. The ANM-1610 supports WBC600, LMR600 and CA-600 and is specified for DC to 6 GHz operation.

HyperLink Wireless 2.4 GHz 8.5 dBi Omnidirectional Wireless LAN Antenna

Reference: HG2409U

€172.43 (tax incl.)

8.5 dBi omnidirectional antenna with vertical polarization and an integral N male connector for 2.36–2.5 GHz. Its UV-stable fiberglass radome has ventilation and drainage for all-weather use.

2.4/5 GHz 7dBi Dual Band Rigid Rubberduck Antenna - N-Male Connector

Reference: HG2458-7RDR-NM

€144.17 (tax incl.)

Dual-band rigid antenna for 2.4–2.5 and 5.1–5.9 GHz with a standard-polarity N male connector. It provides 4.5 dBi at 2.4 GHz and 7 dBi at 5.8 GHz and is 7.07 in long.

Type N Male Clamp for RG8, 400-Series Cable

Reference: ANM-2400

€17.85 (tax incl.)

N male clamp connector for RG8 and other compatible 400-series cables. It has a straight body, standard polarity, a 50 Ω impedance and a gold-plated center pin.

Type N Male Solderless Crimp for 400-Series Low Loss Coax Cable

Reference: ANM-1420

€15.73 (tax incl.)

50 Ω N male connector for 400-series cables with solid center conductors. The captive gold-plated center pin needs no soldering or crimping and the body is nickel-plated brass.

Type N Male Clamp for 600-Series Cable

Reference: ANM-2602

€26.92 (tax incl.)

Straight standard-polarity N male clamp connector for 600-series cables. It has a 50 Ω impedance, DC to 11 GHz range and gold-plated center pin.

Type N Male Crimp Right Angle for RG8, 400-Series Cable

Reference: ANM-1416

€24.99 (tax incl.)

Right-angle N male crimp connector for RG8 and other compatible 400-series cables. It has standard polarity, a 50 Ω impedance and a DC to 11 GHz operating range.

Type N Male Crimp Right Angle for RG58, 195-Series Cable

Reference: ANM-1716

€21.18 (tax incl.)

Right-angle N male crimp connector for RG58 and other compatible 195- and 200-series cables. It has standard polarity, a 50 Ω impedance and a DC to 6 GHz operating range.

2.4 GHz 8 dBi Round Patch Antenna - 10in N-Male Connector

Reference: HG2408P-NM

€144.17 (tax incl.)

Indoor 2.4 GHz 8 dBi round patch antenna with a 10 in lead and N male connector. It mounts on a wall or ceiling with vertical or horizontal polarization and has a white UV-stable radome.

0-6 GHz Type N Male Terminator 50 Ohm

Reference: ANM-TERM1

€32.85 (tax incl.)

50 Ω coaxial terminator with an N male connector for open coaxial ends and signal splitters. It operates from DC to 6 GHz, accepts up to 1 W and has maximum VSWR of 1.5:1.

W-Male (WaveRider® Compatible) Crimp for RG58 and 195-Series Cable

Reference: AWM-1700

€5.87 (tax incl.)

W-Male (WaveRider® Compatible) Crimp for RG58 and 195-Series Cable. Can be used with L-com CA-195R, RG58/141/142, L-com CA195RW, WBC/LMR®195, Belden 8240/8219 cable types. Temperature-cycling, moisture-resistance,...

Type N Male Crimp for RG213/U Cable

Reference: BAC506

€33.46 (tax incl.)

Type N Male Crimp for RG213/U Cable. Machined, nickel-plated body and ferrule. Gold-plated center pin.

Type N Male Crimp for RG58C/U Cable

Reference: BAC519

€23.47 (tax incl.)

Type N Male Crimp for RG58C/U Cable. Machined, nickel-plated body and coupling nut. Gold-plated center pin.

Type N Male Clamp for RG213/U Cable

Reference: BAN111

€22.69 (tax incl.)

Type N Male Clamp for RG213/U Cable.

Type N Male Crimp for RG142/RG223/RG400 Cable

Reference: BAC536

€28.31 (tax incl.)

Type N Male Crimp for RG142/RG223/RG400 Cable. Machined, nickel-plated body and ferrule. Gold-plated center pin.

Type N Male Crimp for RG174 Cable

Reference: BAC523

€25.71 (tax incl.)

Type N Male Crimp for RG174 Cable. Machined, nickel-plated body and coupling nut. Gold-plated center pin.

Type N Male Right Angle Clamp for RG8, 400-Series Cable

Reference: ANM-2402

€36.00 (tax incl.)

Type N Male Right Angle Clamp for RG8, 400-Series Cable. Can be used with LMR®400‚ WBC400 and L-com 400-Series cable types. Frequency stated as approximately 6 GHz.

Type N Male Clamp for 900-Series Cable

Reference: ANM-2904

€121.48 (tax incl.)

Type N Male Clamp for 900-Series Cable. For use with LMR®900 cable. This connector is equivalent to Times Microwave® EZ-900-NMC-2. Ternary-alloy body finish.

Type-N Protective Cap for Female, with Chain

Reference: ANM-CAP01

€25.29 (tax incl.)

Protective cap for a N female coaxial interface. Protects the interface while it is disconnected.

Add to cart

Quick view