Coaxial (4)

Reference: HT-TAPE01

€103.64 (tax incl.)

3M® self-healing weatherproofing tape supplied as a 2 in wide, 10 ft long roll. It is intended for outdoor networks, harsh environments and industrial networking.

Type N Female Crimp for RG58, 195-Series Cable

Reference: ANF-1700

€14.88 (tax incl.)

Straight standard-polarity N female crimp connector for RG58 and other compatible 195-series cables. It has a 50 Ω impedance and operates from DC to 6 GHz.

L-com CA-240 Coax Cable Bulk Reel 500.0 feet

Reference: CA-240-R500

€955.90 (tax incl.)

Low-loss flexible 50 Ω CA-240 coaxial cable on a 500 ft reel. It has a UV-resistant polyethylene jacket, foam-PE dielectric and two shields.

Strain Relief Boots RG-58

Reference: HXX-SR58L

€1.21 (tax incl.)

Strain-relief boot for protecting RG58 cable against stress in a coaxial assembly. It accepts cable up to 5 mm outside diameter and N, RP-N, BNC, RP-BNC, TNC and RP-TNC applications.

Type N Female Crimp Bulkhead for 100-Series Cable

Reference: ANF-3102

€16.94 (tax incl.)

Standard-polarity N female double-D bulkhead connector for 100-series coaxial cable. The body uses crimp attachment and the center contact is designed for solder attachment.

Type N Male Clamp for RG8, 400-Series Cable

Reference: ANM-2400

€17.85 (tax incl.)

N male clamp connector for RG8 and other compatible 400-series cables. It has a straight body, standard polarity, a 50 Ω impedance and a gold-plated center pin.

TNC Female Crimp for RG8, 400-Series Cable

Reference: ATF-1402

€15.31 (tax incl.)

Standard-polarity TNC female connector for RG8 and other compatible 400-series cables. It has a straight body, a 50 Ω impedance and a DC to 6 GHz range.

Type N Male Solderless Crimp for 400-Series Low Loss Coax Cable

Reference: ANM-1420

€15.73 (tax incl.)

50 Ω N male connector for 400-series cables with solid center conductors. The captive gold-plated center pin needs no soldering or crimping and the body is nickel-plated brass.

Coaxial Adapter, Type-N Female / BNC Male

Reference: AXA-NFBM

€15.97 (tax incl.)

Straight coaxial adapter with BNC male and N female connectors, both standard-polarity 50 Ω interfaces. It operates from DC to 3 GHz and has nickel-plated brass bodies.

Type N Male Clamp for 600-Series Cable

Reference: ANM-2602

€26.92 (tax incl.)

Straight standard-polarity N male clamp connector for 600-series cables. It has a 50 Ω impedance, DC to 11 GHz range and gold-plated center pin.

QMA Plug Crimp for RG58, 195-Series Cable

Reference: AQP-1702

€31.46 (tax incl.)

QMA male crimp connector with quick disconnect and free rotation when mated. It has a straight body, standard polarity and a 50 Ω impedance, with operation from DC to 18 GHz.

RP-SMA Plug Crimp for 195-Series Cable

Reference: ARSP-1700

€1.94 (tax incl.)

RP-SMA crimp plug for compatible 195-series cables. It has a straight body, reverse polarity and a 50 Ω impedance, with operation from DC to 6 GHz.

0-6 GHz RP-SMA Plug Terminator 50 Ohm

Reference: ARSP-TERM

€20.15 (tax incl.)

50 Ω coaxial terminator with an RP-SMA plug for open coaxial ends and signal splitters. It operates from DC to 6 GHz, accepts up to 1 W and has maximum VSWR of 1.5:1.

RP-TNC Crimp Jack for RG8 & 400-Series Cable

Reference: ARTJ-1404

€15.06 (tax incl.)

RP-TNC crimp jack for RG8 and compatible 400-series cables. It has a straight body, reverse polarity and a 50 Ω impedance, with operation from DC to 4 GHz.

SMA Male Crimp for RG316/174/188, 100-Series Cable

Reference: ASM-1102

€16.64 (tax incl.)

Straight standard-polarity SMA male crimp connector for RG316/174/188 and 100-series cable. It has a 50 Ω impedance, DC to 6 GHz range and gold-plated contacts.

SMA Male Crimp for 195-Series Cable

Reference: ASM-1708

€14.28 (tax incl.)

Straight standard-polarity SMA male crimp connector for 195-series cable. It has a 50 Ω impedance, DC to 6 GHz range and gold-plated contacts.

Coaxial Adapter, NMO (TAD) Mobile Antenna Mount / N-Female Bulkhead

Reference: AXA-AMNFB

€56.14 (tax incl.)

Mobile antenna mount adapter with a Motorola®-type NMO/TAD connection and N female bulkhead at the opposite end. It accepts panels up to 11/16 in, stated as 17.4 mm, and includes an O-ring.

Coaxial Adapter, TNC Female / N-Male

Reference: AXA-NMTF

€18.45 (tax incl.)

Straight coaxial adapter with a standard-polarity N male and a standard-polarity TNC female. Both ends have a 50 Ω impedance and nickel-plated bodies.

Coaxial Adapter, N-Female Bulkhead / RP-SMA Jack

Reference: AXA-RSJNFB

€21.48 (tax incl.)

Straight coaxial adapter with a reverse-polarity RP-SMA jack and a standard-polarity N female. Both ends have a 50 Ω impedance and nickel-plated bodies.

Coaxial Adapter, RP-TNC Jack / RP-SMA Plug

Reference: AXA-RTJRSP

€13.61 (tax incl.)

Straight coaxial adapter with a reverse-polarity RP-TNC jack and a reverse-polarity RP-SMA plug. Both ends have a 50 Ω impedance and nickel-plated bodies.

Coaxial Adapter, SMA Male / BNC Male

Reference: BA28

€27.23 (tax incl.)

Straight coaxial adapter with a standard-polarity BNC male and a standard-polarity SMA male. Both ends have a 50 Ω impedance and nickel-plated bodies.

Coaxial Adapter, SMA Female / BNC Male

Reference: BA38

€25.59 (tax incl.)

Straight coaxial adapter with a standard-polarity BNC male and a standard-polarity SMA female. Both ends have a 50 Ω impedance and nickel-plated bodies.

MCX Jack Crimp Connector for RG174/188/316

Reference: BAC526

€11.19 (tax incl.)

MCX crimp jack for RG174, RG188 and RG316 cables. It has a 50 Ω snap-on interface, a straight standard-polarity body and gold plating on the body and center contact.

Type N Female Crimp for RG174/188/316 Cable

Reference: BAC527

€22.69 (tax incl.)

N female crimp connector for RG174, RG188 and RG316 with a gold-plated solder center contact. It has a straight body, standard polarity and a 50 Ω impedance, with a DC to 6 GHz range.

Add to cart

Quick view