Reference: DGBH15MF
€28.62
(tax incl.)
Low-profile HD15 male/female adapter. Wired straight through.
Filter By
Filter By
Home
Reference: DGB9MT1-CVR
€6.59
(tax incl.)
Cover for the DGB9MT1 field-termination connector. Black ABS material with a published UL94V-0 flammability rating.
Reference: DGB9MT1
€24.38
(tax incl.)
Male DB9 field-termination connector. Terminal block with set screws. Panel mounting for thicknesses up to 0.062 inches.
Reference: DGB9F
€24.38
(tax incl.)
Low-profile DB9 female/female adapter. Wired straight through.
Reference: DGB50MF
€42.83
(tax incl.)
Low-profile DB50 male/female adapter. Wired straight through.
Reference: DGB9FT
€26.92
(tax incl.)
Female DB9 field-termination connector. Terminal block with set screws. Panel mounting for thicknesses up to 0.062 inches.
Reference: DGB9FT-CVR
€8.41
(tax incl.)
Cover for the DGB9FT field-termination connector. Black ABS material with a published UL94V-0 flammability rating.
Reference: DGB9MF
€16.94
(tax incl.)
Low-profile DB9 male/female adapter. Wired straight through.
Reference: DGB9M
€17.85
(tax incl.)
Low-profile DB9 male/male adapter. Wired straight through.
Reference: DHP15G
€12.16
(tax incl.)
Pair of grey-plastic D-Sub half-covers for DB15. Includes two snap-on ABS half-covers and mating hardware.
Reference: DHP25B
€7.41
(tax incl.)
Pair of black-plastic D-Sub half-covers for DB25. Includes two snap-on ABS half-covers and mating hardware.
Reference: DK-35A
€13.31
(tax incl.)
Kit for mounting ESP10x device servers on a 35 mm DIN rail. Includes two DIN brackets and four mounting screws.
Reference: DJBS
€58.69
(tax incl.)
Configurable-wiring DB25 male/female PCB adapter kit. Connectors are pre-soldered to the PCB; the user solders jumpers through its holes to define the wiring scheme. Includes 20 jumper wires.
Reference: DJB9MF
€42.53
(tax incl.)
Configurable-wiring DB9 male/female PCB adapter kit. Connectors are pre-soldered to the PCB; the user solders jumpers through its holes to define the wiring scheme. Includes 10 jumper wires.
Reference: DIYS
€32.90
(tax incl.)
DIY DB25 male/female adapter kit. Includes two half-covers, two solder-type D-Sub connectors and mating hardware. Wiring and components are user-defined. Pre-stripped and tinned jumper wires are sold separately.
Reference: DIYRA-F
€33.00
(tax incl.)
DIY DB25 female/female adapter kit with crimp-and-poke connectors. Includes two half-covers, two crimp-and-poke D-Sub connectors and mating hardware. Wiring and components are user-defined. Pre-terminated RA50 wires...
Reference: DIYRA
€15.97
(tax incl.)
DIY DB25 male/female adapter kit with crimp-and-poke connectors. Includes two half-covers, two crimp-and-poke D-Sub connectors and mating hardware. Wiring and components are user-defined. Pre-terminated RA50 wires are...
Reference: DIYS-M
€34.67
(tax incl.)
DIY DB25 male/male adapter kit. Includes two half-covers, two solder-type D-Sub connectors and mating hardware. Wiring and components are user-defined. Pre-stripped and tinned jumper wires are sold separately.
Reference: DIYW
€16.03
(tax incl.)
Pre-tinned jumper wires supplied in a pack of 25. Cut length of 2 inches, stripped and tinned 1/8 inch at both ends.
Reference: DIYMB
€32.25
(tax incl.)
Blank end cap with no cutouts. End-cap component for user-defined adapters.
Reference: DIYM9F2
€6.05
(tax incl.)
End cap with 2 female DB9 solder-type connectors. D-Sub connectors with solder-cup terminals.
Reference: DIN-MNT44
€14.76
(tax incl.)
DIN 3 rail mounting clip with a published size of 44 mm. Extruded-aluminium clip with retention springs and two mounting holes.
Reference: DIN-MNT30
€19.24
(tax incl.)
DIN 3 rail mounting clip with a published size of 30 mm. Extruded-aluminium clip with retention springs and two mounting holes.
Reference: DIN-SR-NB12
€114.95
(tax incl.)
Supports for NB12-series DIN 3 rails. Pack of two supports. The 35 mm DIN-35-NB12 rail is sold separately.
Showing 14857-14880 of 15915 item(s)