Home

Filter

2.4 GHz 9 dBi Rubber Duck Antenna - RP-TNC Plug Connector

Reference: HG2409RD-RTP

€68.67 (tax incl.)

A flexible 2.4 GHz omnidirectional antenna with 9 dBi gain. It has an RP-TNC Plug tilt-and-swivel connector and a 15.2-inch body.

2.4 GHz 5 dBi Desktop Omni Antenna - 4ft RP-TNC Plug Connector

Reference: RE05U-RTP

€48.28 (tax incl.)

A 2.4 GHz 5 dBi omnidirectional antenna with a magnetic base and an RP-TNC Plug connector. Its attached 4-foot coaxial cable allows placement on a desk, shelf or metal surface.

RP-TNC Bulkhead Jack for RG58, 195-Series Cable

Reference: ARTJ-3702

€13.25 (tax incl.)

The ARTJ-3702 is a straight reverse-polarity TNC bulkhead jack for RG58 and 195-series cable. It has 50 Ω impedance and a specified range from DC to 4 GHz.

RP-TNC Crimp Plug for 240-Series Cable

Reference: ARTP-1502

€13.92 (tax incl.)

The ARTP-1502 is a straight reverse-polarity TNC plug for crimp termination on 240-series cable. It is specified for 50 Ω and DC to 4 GHz and supports WBC240, LMR240, CA-240 and Belden 7808.

RP-TNC Crimp Plug for RG8 & 400-Series Cable

Reference: ARTP-1404

€17.55 (tax incl.)

The ARTP-1404 is a straight reverse-polarity coaxial plug with a crimp termination. The source lists RG8, WBC400, LMR400, CA-400, Belden 9913 and Belden 7810 as compatible cable types.

TNC Male Crimp for RG8, 400-Series Cable

Reference: ATM-1402

€17.85 (tax incl.)

This straight standard-polarity TNC-male connector supports crimp termination on RG8 and 400-series cable. The ATM-1402 is specified for 50 Ω and DC to 4 GHz operation.

RP-TNC Crimp Jack for RG58, 195-Series Cable

Reference: ARTJ-1708

€11.50 (tax incl.)

Straight 50 Ω RP-TNC crimp jack for RG58 and other compatible cables listed by the manufacturer. It operates from DC to 4 GHz and uses a gold-plated contact.

RP-TNC Crimp Plug Right Angle for RG58, 195-Series Cable

Reference: ARTP-1714

€17.85 (tax incl.)

Right-angle RP-TNC crimp plug for RG58 and other compatible 195-series cables. It has a 50 Ω impedance and a DC to 4 GHz operating range.

2.4 GHz 3 dBi Rubber Duck Antenna - RP-TNC Connector

Reference: HG2403RD-RTF

€30.86 (tax incl.)

2.4 GHz 3 dBi omnidirectional rubber-duck antenna with a reverse-polarity TNC plug. It is 5.4 in long and allows tilt-and-swivel adjustment.

TNC Female Crimp for RG8, 400-Series Cable

Reference: ATF-1402

€15.31 (tax incl.)

Standard-polarity TNC female connector for RG8 and other compatible 400-series cables. It has a straight body, a 50 Ω impedance and a DC to 6 GHz range.

RP-TNC Crimp Jack for RG8 & 400-Series Cable

Reference: ARTJ-1404

€15.06 (tax incl.)

RP-TNC crimp jack for RG8 and compatible 400-series cables. It has a straight body, reverse polarity and a 50 Ω impedance, with operation from DC to 4 GHz.

Dust Cap for Fiber SC Coupler Pkg/10

Reference: DSTCP-SC

€7.20 (tax incl.)

Dust caps for protecting SC fiber couplers and adapters against dust and dirt. They are made from rugged plastic and supplied in packs of 10.

Tripplite 4-Port HDMI Splitter for Video & Audio 1080p

Reference: TL-B118-004

€188.76 (tax incl.)

A Tripplite HDMI splitter that sends one video and audio source to four displays, with HD video up to 1080p. It supports computer resolutions up to 1920×1200, 3D, 36-bit Deep Color and multichannel audio.

RJ45 Snap-on Strain Relief Boot- Blue, Bag 50

Reference: TDS8CVR-BL

€43.74 (tax incl.)

A bag of 50 blue RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Green, Bag 50

Reference: TDS8CVR-GN

€44.77 (tax incl.)

A bag of 50 green RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Red, Bag 50

Reference: TDS8CVR-RD

€57.66 (tax incl.)

A bag of 50 red RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Ivory, Bag 50

Reference: TDS8CVR-IV

€49.01 (tax incl.)

A bag of 50 ivory RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Gray, Bag 50

Reference: TDS8CVR-GR

€45.07 (tax incl.)

A bag of 50 gray RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- White, Bag 50

Reference: TDS8CVR-WH

€49.91 (tax incl.)

A bag of 50 white RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Yellow, Bag 50

Reference: TDS8CVR-YL

€49.91 (tax incl.)

A bag of 50 yellow RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

Add to cart

Quick view