RF coaxial cables.

RF coaxial cables.

Finding the right coaxial cable for your application can be a bit tedious. or get

the right length. Most of the time it is necessary to make the connectors in the field to

achieve the desired length (See video of crimping connectors), but other times

you can get cables made to measure for each of your applications and in this

Wireless Lan can help you as we manufacture customized caox cables according to the

specifications of our customers, type of cable, measurements, connectors, etc. And all of them

tested to achieve excellent quality.

Types of coaxial cables.

There are many types of coax cables and depends on the frequency you want to use, the technology

and distance that we are going to use, we need one type of cable or another.

To connect mobile repeaters, such as the Stella Doradus, it is usually

they need long coaxial cable distances, more than 10 meters and the frequencies range from 800Mhz to

2.6Ghz. For applications of this type we need cables with low losses per meter, and

Of course they can work at these frequencies. Cables of type LMR-240, LMR400 and LMR-600 can be

use without problems.

There are other applications in which we can use coaxial cables such as for connecting external Wi-Fi antennas, where the distances are usually very short, less than one meter. And we know that wifi frequencies

They are 2.4Ghz or 5Ghz. For this type of applications a narrow and flexible cable is usually the

best option, since the losses per meter is not a very important parameter compared

with ease of installation and sometimes with aesthetics. In this case, a cable of type LMR-195 is a

good option.

Of course there are many more applications and each with ideal cables and connectors,

television antennas, industrial applications, amateur radio, etc. The Wireless Lan we can

guide you to the best solution for your project.

The connectors that we should use at any time normally depend on the connector

which has our radio equipment and antennas. Antennas can often be obtained

with different connectors to facilitate interoperability. In Wireless Lan we can do the

custom cables with the type of connector you want, to avoid the need for adapters

that could be cumbersome and increase power losses.

Contact us without any commitment and we will advise you on the wiring and

connectors that best adapt to your needs.