L-COM

RP-SMA Jack Crimp for RG58,195-Series Cable

Reference: ARSJ-1700

€2.00 (tax incl.)

The ARSJ-1700 is a straight reverse-polarity SMA jack for crimp termination. It has 50 Ω impedance and supports RG58, RG141, RG142 and several 195-series cable types.

RP-SMA Jack Bulkhead Crimp for RG58,195-Series Cable

Reference: ARSJ-3700

€14.88 (tax incl.)

This reverse-polarity SMA jack has a straight body and bulkhead mounting for RG58 and 195-series cable. The ARSJ-3700 uses a crimp termination and is specified for 50 Ω and DC to 6 GHz.

RP-TNC Bulkhead Jack for RG58, 195-Series Cable

Reference: ARTJ-3702

€13.25 (tax incl.)

The ARTJ-3702 is a straight reverse-polarity TNC bulkhead jack for RG58 and 195-series cable. It has 50 Ω impedance and a specified range from DC to 4 GHz.

RP Type N Jack Crimp for RG8, 400-Series Cable

Reference: ARNJ-1404

€13.61 (tax incl.)

The ARNJ-1404 is a straight reverse-polarity N jack for crimp termination on RG8 and 400-series cable. It has a gold-plated contact and is specified for 50 Ω and DC to 11 GHz operation.

RP-SMA Jack Crimp for RG8, 400-Series Cable

Reference: ARSJ-1404

€17.85 (tax incl.)

The ARSJ-1404 is a straight reverse-polarity SMA jack for crimp termination on RG8 and 400-series cable. Its specifications state 50 Ω impedance and DC to 6 GHz operation.

RP-TNC Crimp Jack for RG58, 195-Series Cable

Reference: ARTJ-1708

€11.50 (tax incl.)

Straight 50 Ω RP-TNC crimp jack for RG58 and other compatible cables listed by the manufacturer. It operates from DC to 4 GHz and uses a gold-plated contact.

RP-TNC Crimp Jack for RG8 & 400-Series Cable

Reference: ARTJ-1404

€15.06 (tax incl.)

RP-TNC crimp jack for RG8 and compatible 400-series cables. It has a straight body, reverse polarity and a 50 Ω impedance, with operation from DC to 4 GHz.

MCX Jack Crimp Connector for RG174/188/316

Reference: BAC526

€11.19 (tax incl.)

MCX crimp jack for RG174, RG188 and RG316 cables. It has a 50 Ω snap-on interface, a straight standard-polarity body and gold plating on the body and center contact.

Dual Band GPS/Cellular (3G/LTE) Mobile Magnetic Mount Antenna - Fakra Connectors

Reference: HG-PCGM01-03FJ

€85.55 (tax incl.)

Combined GPS and penta-band 3G/LTE cellular antenna with an integral magnetic base and UV-resistant ABS radome. It has two 3 m leads, one for GPS and one for cellular, terminated in FAKRA jacks.

SMB Jack Crimp for 100-Series, RG316/174 Cable

Reference: ASMBJ-1100

€13.25 (tax incl.)

SMB Jack Crimp for 100-Series, RG316/174 Cable.

RP-TNC Bulkhead Jack for RG8, 400-Series Cable

Reference: ARTJ-3400

€16.64 (tax incl.)

RP-TNC Bulkhead Jack for RG8, 400-Series Cable. Can be used with RG8‚ WBC400‚ LMR®400‚ HyperLink CA-400, Belden 9913, 7810 cable types. Temperature-cycling, moisture-resistance, corrosion, vibration and altitude...

RP-TNC Jack Bulkhead Crimp for RG174/188/316 & 100-Series Cable

Reference: ARTJ-3100

€18.45 (tax incl.)

RP-TNC Jack Bulkhead Crimp for RG174/188/316 & 100-Series Cable. Complete with nut and lockwasher mounting hardware. For use with RG174/188/316‚ L-com CA100‚ WBC100‚ LMR®100‚ Belden 7805 cable types. Gold plated...

Reverse Polarity TNC Jack Bulkhead Solderless Crimp for 195-Series Low Loss Cable

Reference: ARTJ-3704

€11.98 (tax incl.)

Reverse Polarity TNC Jack Bulkhead Solderless Crimp for 195-Series Low Loss Cable. Can be used with LMR®195, CNT-195, TWS-195 and L-com's CA-195. Captive gold plated center pin requires no soldering or crimping....

RP-TNC Crimp Jack for 600-Series Cable

Reference: ARTJ-1606

€1.94 (tax incl.)

RP-TNC Crimp Jack for 600-Series Cable. Can be used with WBC600‚ LMR®600 cable types. Operating temperature from -55 to +85 °C. Environmental characteristics follow MIL-Std. 202.

RP-TNC Jack Crimp for RG174/188/316 & 100-Series Cable

Reference: ARTJ-1100

€3.09 (tax incl.)

RP-TNC Jack Crimp for RG174/188/316 & 100-Series Cable. Can be used with RG174/188/316‚ L-com CA100‚ WBC100‚ LMR®100‚ Belden 7805 cable types. Gold-plated center contact.

RP-TNC Crimp Jack for RG58 Cable

Reference: BAC501

€3.63 (tax incl.)

RP-TNC Crimp Jack for RG58 Cable. Designed for crimp attachment to RG58/U style cable. Gold plated center contacts minimize signal loss. Mates with reverse polarized interface commonly found in wireless systems.

RP-SMA Jack Bulkhead Crimp for RG174, RG188 and RG316 Cable

Reference: BAC503

€17.24 (tax incl.)

RP-SMA Jack Bulkhead Crimp for RG174, RG188 and RG316 Cable. Bulkhead design for panel mounting. Designed for crimp attachment to RG174/188 or 316 style cable. Gold plated center contacts minimize signal loss.

RP BNC Crimp Jack for RG58, 195-Series Cable

Reference: ARBJ-1700

€10.71 (tax incl.)

RP BNC Crimp Jack for RG58, 195-Series Cable. Can be used with HyperLink CA-195R, RG58/141/142‚ HyperLink CA195RW‚ WBC195‚ LMR®195‚ Belden 8240/8219 cable types. Ferrule crimp size: .178 inches. Pin: .068 inches. BNC...

RP-SMA Jack Bulkhead Crimp for RG174/188/316 & 100-Series Cable

Reference: ARSJ-3100

€11.68 (tax incl.)

RP-SMA Jack Bulkhead Crimp for RG174/188/316 & 100-Series Cable. Complete with nut and lockwasher mounting hardware. For use with RG174/188/316‚ L-com CA100‚ WBC100‚ LMR®100‚ Belden 7805 cable types. Gold plated...

RP Type N Jack Crimp for RG58, 195-Series Cable

Reference: ARNJ-1700

€3.63 (tax incl.)

RP Type N Jack Crimp for RG58, 195-Series Cable. Can be used with L-com CA-195 series cable, RG58/141/142‚ WBC/CNT195‚ LMR®195‚ TWS-195, Belden 8240/8219 cable types. Moisture-resistance and corrosion characteristics...

FME Jack Crimp - RG58, LMR®195 Cable

Reference: AFMEJ-1700

€13.61 (tax incl.)

FME Jack Crimp - RG58, LMR®195 Cable. Crimp style attachment results in robust connector to cable attachment. Nickel plated body for superior corrosion resistance. Gold plated contact pin reduces signal loss.

Add to cart

Quick view

Price

Products