L-COM

MCX Jack Crimp Connector for RG174/188/316

Reference: BAC526

€11.19 (tax incl.)

MCX crimp jack for RG174, RG188 and RG316 cables. It has a 50 Ω snap-on interface, a straight standard-polarity body and gold plating on the body and center contact.

75 Ohm BNC Twist On Plug for RG59 and RG62 Cable

Reference: BAC838-59

€11.19 (tax incl.)

75 Ω BNC male twist-on connector for RG59, requiring no special attachment tools. It has a straight body, standard polarity and a gold-plated center contact.

Dust Cap for Fiber SC Coupler Pkg/10

Reference: DSTCP-SC

€7.20 (tax incl.)

Dust caps for protecting SC fiber couplers and adapters against dust and dirt. They are made from rugged plastic and supplied in packs of 10.

RJ45 Snap-on Strain Relief Boot- Blue, Bag 50

Reference: TDS8CVR-BL

€43.74 (tax incl.)

A bag of 50 blue RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Green, Bag 50

Reference: TDS8CVR-GN

€44.77 (tax incl.)

A bag of 50 green RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Red, Bag 50

Reference: TDS8CVR-RD

€57.66 (tax incl.)

A bag of 50 red RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Ivory, Bag 50

Reference: TDS8CVR-IV

€49.01 (tax incl.)

A bag of 50 ivory RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Gray, Bag 50

Reference: TDS8CVR-GR

€45.07 (tax incl.)

A bag of 50 gray RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- White, Bag 50

Reference: TDS8CVR-WH

€49.91 (tax incl.)

A bag of 50 white RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Yellow, Bag 50

Reference: TDS8CVR-YL

€49.91 (tax incl.)

A bag of 50 yellow RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

Protective Chained Cap, BNC

Reference: USP-PCB

€14.40 (tax incl.)

Metal cap protects disconnected female BNC coaxial interfaces. It has a retaining chain and a moisture-resistant gasket.

IP67 Rated Jack Cover for Female Receptacles with Tether

Reference: WT67RCT

€52.82 (tax incl.)

The WT67RCT is a protective cap for compatible WT-series RJ45 female receptacles.

Protective Chained Cap Terminator, BNC 50 Ohm

Reference: USP-CTB50

€23.47 (tax incl.)

Male BNC RF terminator has a 50 Ω, 0.25 W terminating resistor and retaining chain. Its frequency range is DC to 1 GHz, with maximum VSWR of 1.4:1.

Protective Chained Cap Terminator, BNC 75 Ohm

Reference: USP-CTB75

€21.48 (tax incl.)

Male BNC RF terminator has a 75 Ω, 0.25 W terminating resistor and retaining chain. Its frequency range is DC to 1 GHz, with maximum VSWR of 1.5:1.

USB Cover, Waterproof

Reference: WPUSB-CVR

€21.48 (tax incl.)

USB Cover, Waterproof.

IP67 Rated Jack Cover for Male Plug Kits

Reference: WT67PC

€36.60 (tax incl.)

The WT67PC is a protective cap for compatible WT-series RJ45 male plug kits.

IP67 Jack Cover for Male Plug Kits w/Tether

Reference: WT67PCT

€62.50 (tax incl.)

The WT67PCT is a protective cap for compatible WT-series RJ45 male plug kits.

Shielded Waterproof Cap for USB IP67 Cables

Reference: WPCVR-SHLD-USB

€26.92 (tax incl.)

Waterproof cover protects WPUSBAXSH USB cable ports with shielding. It maintains IP67 when fully seated.

IP65 Rated Protective Cap for Jacks

Reference: WJ650300

€34.67 (tax incl.)

IP65 protective cap fits WJ-series jacks. It is made of nylon and uses a threaded connection.

Protective Cover for Cordset

Reference: WJ670301

€59.59 (tax incl.)

Protective cap with lanyard fits compatible TRD3115M and WJAM315 assemblies. It provides IP67 sealing when installed on the appropriate connection.

Protective Cover for eSATA Computer/Connector Ports, Pkg/10

Reference: CAP-ESATA

€23.47 (tax incl.)

Ten black plastic covers for eSATA equipment ports, with friction fit and elevated grip.

W-Male (WaveRider® Compatible) Crimp for RG58 and 195-Series Cable

Reference: AWM-1700

€5.87 (tax incl.)

W-Male (WaveRider® Compatible) Crimp for RG58 and 195-Series Cable. Can be used with L-com CA-195R, RG58/141/142, L-com CA195RW, WBC/LMR®195, Belden 8240/8219 cable types. Temperature-cycling, moisture-resistance,...

Add to cart

Quick view