L-COM

2.4 GHz 5 dBi Desktop Omni Antenna - 4ft MMCX Connector

Reference: RE05U-MM

€11.68 (tax incl.)

A 2.4 GHz 5 dBi omnidirectional antenna with a magnetic base and an MMCX Male connector. Its attached 4-foot coaxial cable allows placement on a desk, shelf or metal surface.

MMCX-Male Crimp Right Angle for RG316,100-Series Cable

Reference: AMMM-1104

€10.71 (tax incl.)

This right-angle MMCX crimp connector has standard polarity and 50 Ω impedance for RG316, RG174 and RG188 cables. The source also lists WBC100, LMR100A and Belden 7805 compatibility.

RP-MMCX Crimp Right Angle for LMR 100, RG174/188/316 Cable

Reference: ARMMP-1100

€6.11 (tax incl.)

The ARMMP-1100 is a right-angle coaxial crimp connector with reverse polarity and 50 Ω impedance. The source lists compatibility with RG316, RG174, RG188, WBC100, LMR100A and Belden 7805.

ST Dust Cap for MIL or Ruggedized COTS Couplers, Nickel Plated Brass with Lanyard

Reference: DSTCP-RSTADPTN

€68.37 (tax incl.)

Nickel-plated brass ST dust cap for compatible MIL or ruggedized COTS couplers. It includes a lanyard and is designed to complement the FOA-RST and FOA-M83522 coupler lines.

ST Dust Cap for MIL or Ruggedized COTS Couplers, Stainless Steel with Lanyard

Reference: DSTCP-RSTADPTS

€74.60 (tax incl.)

Stainless steel ST dust cap for compatible MIL or ruggedized COTS couplers. It includes a lanyard and is designed to complement the FOA-RST and FOA-M83522 coupler lines.

ST Dust Cap for MIL or Ruggedized COTS Connectors, Nickel Plated Brass with Lanyard

Reference: DSTCP-RSTN

€97.10 (tax incl.)

Nickel-plated brass ST dust cap for compatible MIL or ruggedized COTS connectors. It includes a lanyard and complements the FOC-RST and FOC-M83522 connector lines.

ST Dust Cap for MIL or Ruggedized COTS Connectors, Stainless Steel with Lanyard

Reference: DSTCP-RSTS

€82.58 (tax incl.)

Stainless steel ST dust cap for compatible MIL or ruggedized COTS connectors. It includes a lanyard and complements the FOC-RST and FOC-M83522 connector lines.

Dust Cap for Fiber ST Coupler Pkg/10

Reference: DSTCP-ST

€7.68 (tax incl.)

Dust caps for protecting ST fiber couplers and adapters against dust and dirt. They are made from rugged plastic and supplied in packs of 10.

RJ45 Snap-on Strain Relief Boot- Blue, Bag 50

Reference: TDS8CVR-BL

€43.74 (tax incl.)

A bag of 50 blue RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Green, Bag 50

Reference: TDS8CVR-GN

€44.77 (tax incl.)

A bag of 50 green RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Red, Bag 50

Reference: TDS8CVR-RD

€57.66 (tax incl.)

A bag of 50 red RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Ivory, Bag 50

Reference: TDS8CVR-IV

€49.01 (tax incl.)

A bag of 50 ivory RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Gray, Bag 50

Reference: TDS8CVR-GR

€45.07 (tax incl.)

A bag of 50 gray RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- White, Bag 50

Reference: TDS8CVR-WH

€49.91 (tax incl.)

A bag of 50 white RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

RJ45 Snap-on Strain Relief Boot- Yellow, Bag 50

Reference: TDS8CVR-YL

€49.91 (tax incl.)

A bag of 50 yellow RJ45 Snap-on boots with Snagless design and strain relief. They fit cable outside diameters up to 0.236 in and can be used with TDS8PC5 and TDS8PC6 connectors.

IP67 Rated Jack Cover for Female Receptacles with Tether

Reference: WT67RCT

€52.82 (tax incl.)

The WT67RCT is a protective cap for compatible WT-series RJ45 female receptacles.

IP67 Rated Jack Cover for Male Plug Kits

Reference: WT67PC

€36.60 (tax incl.)

The WT67PC is a protective cap for compatible WT-series RJ45 male plug kits.

IP67 Jack Cover for Male Plug Kits w/Tether

Reference: WT67PCT

€62.50 (tax incl.)

The WT67PCT is a protective cap for compatible WT-series RJ45 male plug kits.

IP65 Rated Protective Cap for Jacks

Reference: WJ650300

€34.67 (tax incl.)

IP65 protective cap fits WJ-series jacks. It is made of nylon and uses a threaded connection.

Protective Cover for Cordset

Reference: WJ670301

€59.59 (tax incl.)

Protective cap with lanyard fits compatible TRD3115M and WJAM315 assemblies. It provides IP67 sealing when installed on the appropriate connection.

Protective Cover for eSATA Computer/Connector Ports, Pkg/10

Reference: CAP-ESATA

€23.47 (tax incl.)

Ten black plastic covers for eSATA equipment ports, with friction fit and elevated grip.

W-Male (WaveRider® Compatible) Crimp for RG58 and 195-Series Cable

Reference: AWM-1700

€5.87 (tax incl.)

W-Male (WaveRider® Compatible) Crimp for RG58 and 195-Series Cable. Can be used with L-com CA-195R, RG58/141/142, L-com CA195RW, WBC/LMR®195, Belden 8240/8219 cable types. Temperature-cycling, moisture-resistance,...

Add to cart

Quick view