L-COM (6)

Type N Female Crimp for 600-Series Cable

Reference: ANF-1610

€27.53 (tax incl.)

This straight standard-polarity N-female connector supports crimp termination on 600-series cable. The ANF-1610 is specified for 50 Ω and DC to 6 GHz and supports WBC600 and LMR600.

Type N Female Clamp for 600-Series Cable

Reference: ANF-2602

€20.15 (tax incl.)

The ANF-2602 is a straight standard-polarity N-female connector with a clamp termination. It is specified for 50 Ω and DC to 6 GHz and supports WBC600, LMR600 and CA-600 cable.

Type N Male Crimp for 600-Series Cable

Reference: ANM-1610

€27.53 (tax incl.)

This straight 50 Ω N-male connector has a crimp termination and a gold-plated center pin. The ANM-1610 supports WBC600, LMR600 and CA-600 and is specified for DC to 6 GHz operation.

ORiNOCO® AP-600/700/4000 to N-Female BH, 19" 100-Series

Reference: CA-AMNFBCN19

€27.83 (tax incl.)

This 19-inch 100-series coaxial pigtail has a right-angle Alprox male connector and a straight N-female bulkhead connector. It is compatible with ORiNOCO AP-600, AP-700 and AP-4000 access points, with 50 Ω cable and...

RP-BNC Plug to N-Female, Pigtail 2 ft 195-Series

Reference: CA-RBPNFA002

€72.00 (tax incl.)

This 2-foot 195-series coaxial pigtail has a reverse-polarity BNC plug and a standard-polarity N-female connector. Both connectors are straight and have 50 Ω impedance, as does the cable.

RP-BNC Plug to N-Male, Pigtail 2 ft 195-Series

Reference: CA-RBPNMA002

€63.22 (tax incl.)

This 2-foot 195-series coaxial pigtail has a reverse-polarity BNC plug and a standard-polarity N-male connector. Both connectors are straight and have 50 Ω impedance, as does the cable.

RP-SMA Plug to N-Female, Pigtail 2 ft 195-Series

Reference: CA-RSPNFA002

€57.66 (tax incl.)

This 2-foot 195-series coaxial pigtail has a reverse-polarity SMA plug and a standard-polarity N-female connector. Both connectors are straight and have 50 Ω impedance, as does the cable.

CA,195 RP-SMA PLUG/N-MALE 2FT

Reference: CA-RSPNMA002

€26.92 (tax incl.)

This 2-foot 195-series coaxial pigtail has a reverse-polarity SMA plug and a standard-polarity N-male connector. Both connectors are straight and have 50 Ω impedance, as does the cable.

RP-TNC Plug to N-Female, Pigtail 2 ft 195-Series

Reference: CA-RTPNFA002

€73.21 (tax incl.)

The CA-RTPNFA002 is a 2-foot coaxial pigtail using low-loss 195-series cable. The source identifies a reverse-polarity TNC plug and specifies 50 Ω cable impedance.

RP-TNC Plug to N-Male, Pigtail 2 ft 195-Series

Reference: CA-RTPNMA002

€49.01 (tax incl.)

This 2-foot coaxial pigtail has a reverse-polarity TNC plug and an N-male connector. The CA-RTPNMA002 uses low-loss 195-series coaxial cable for antenna and radio connections.

SMA-Male to N-Female, Pigtail 2 ft 195-Series

Reference: CA-SMNFA002

€61.59 (tax incl.)

2 ft coaxial cable with straight, standard-polarity SMA male and N female connectors. It uses low-loss 195-series cable and is fully tested.

CA,CA-195 SMA MALE/N-MALE 2FT

Reference: CA-SMNMA002

€47.07 (tax incl.)

2 ft coaxial cable with straight, standard-polarity SMA male and N male connectors. The assembly uses low-loss 195-series cable and is fully tested.

ORiNOCO® AP-600/700/4000 to N-Male, 19" 100-Series

Reference: CA-AMNMCN19

€51.61 (tax incl.)

19 in coaxial cable compatible with ORiNOCO® AP-600/700/4000 access points and terminated in N male. It uses 50 Ω 100-series cable and is fully tested.

MMCX to N-Male, Pigtail 19" 100-Series

Reference: CA-MMNMCN19

€58.99 (tax incl.)

19 in coaxial cable with a right-angle MMCX male connector and a straight N male connector. It uses 50 Ω 100-series cable and each assembly is fully tested.

MCX-Plug to N-Male, Pigtail 19" 100-Series

Reference: CA-MPNMCN19

€47.67 (tax incl.)

19 in coaxial cable with straight, standard-polarity MCX plug and N male connectors. It uses 50 Ω 100-series cable and is fully tested.

RP-MMCX to N-Male, Pigtail 19" 100-Series

Reference: CA-RMMNMCN19

€45.68 (tax incl.)

19 in coaxial cable with a right-angle reverse-polarity MMCX plug and a straight standard-polarity N male connector. It uses 50 Ω 100-series cable and is fully tested.

2-Way 2.4 GHz Signal Splitter N-Female Connector

Reference: SC2402N

€195.11 (tax incl.)

2-way signal splitter/combiner for connecting multiple antennas to a single radio over 2.4–2.5 GHz. Its cast-aluminum construction is weatherproof and passes DC power to all ports.

3-Way 2.4 GHz Signal Splitter N-Female Connector

Reference: SC2403N

€240.49 (tax incl.)

3-way signal splitter/combiner for connecting multiple antennas to a single radio over 2.4–2.5 GHz. Its cast-aluminum construction is weatherproof and passes DC power to all ports.

4-Way 2.4 GHz Signal Splitter N-Female Connector

Reference: SC2404N

€257.13 (tax incl.)

4-way signal splitter/combiner for connecting multiple antennas to one radio from 2.4 to 2.5 GHz. Its cast-aluminum housing is weatherproof and passes DC power to all ports.

3-Way Low PIM Rated 750-2700 MHz DAS Signal Splitter

Reference: SCW03N

€177.45 (tax incl.)

3-way signal splitter for DAS networks and RF applications from 750 to 2700 MHz. It has a 50 Ω impedance, accepts up to 50 W input power and uses an aluminum housing.

U.FL to N-Female Bulkhead, Pigtail 20cm 1.13 Mini Coax

Reference: CA-UFLNBQC20

€72.00 (tax incl.)

20 cm coaxial cable with a right-angle U.FL plug and a straight N female bulkhead connector. It uses 50 Ω 1.13 mm mini coax and each assembly is fully tested.

U.FL to N-Male, Pigtail 20cm 1.13 Mini Coax

Reference: CA-UFLNMQC20

€77.74 (tax incl.)

20 cm coaxial cable with a right-angle U.FL plug and a straight N male connector. It uses 50 Ω 1.13 mm mini coax and each assembly is fully tested.

U.FL to RP-SMA Jack Bulkhead, Pigtail 20cm 1.13 Mini Coax

Reference: CA-UFLRSBQC20

€77.44 (tax incl.)

20 cm coaxial cable with a right-angle U.FL plug and a straight RP-SMA jack bulkhead connector. It uses 50 Ω 1.13 mm mini coax and each assembly is fully tested.

Add to cart

Quick view