L Com / Hyperlink Tech NB141207-40F
- Enclosure Material: Fiberglass Reinforced Polyester
- Enclosure Color: Machine Tool Gray
- Mounting Plate Material: 0.10" (2.5mm) Thick Anodized Aluminum
- Mounting Plate Dimensions:
- 12.7 x 10.8 inches
- 32.2 x 27.4 cm
- Outside Dimensions:
- 15.5 x 13.5 x 8.7 inches
- 39.3 x 34.2 x 22 cm
- Inside Dimensions:
- 13.5 x 11.5 x 5.8 inches
- 34.3 x 29.2 x 14.7 cm
- Flame Rating: UL-94-5V
- Cable Feed: 1/2 Cable Conduit Connector
- RoHS Compliant: Yes
- Ratings: NEMA 3R / IP42
Start with the Box...
The box is a rugged weatherproof enclosure that is ideal for both indoor and outdoor applications. Constructed molded fiberglass reinforced polyester, it is well suited for high temperature or corrosive environments. The mounting flange allows it to be wall mounted as well as on a flat surface. The raised lid features a stainless steel continous hinge and stainless steel quick release latches with padlock hasps. The raised lid is fully gasketed. The enclosure material is UV stabilized and comes in machine tool gray.
The aluminum mounting plate has provisions to mount WLAN equipment from Cisco®, Symbol®, D-Link®, Hyperlink and more. With the optional HGX-AMOUNT02 bracket a wide array of Hyperlink products can be mounted as well. Two of these brackets can be mounted side by side. Also available is the HGX-NMOUNT03 Universal Mounting Shelf that can be attached to the mounting plate and can accommodate additional equipment to be placed in the enclosure.
The Mounting Plate features a CAT5 PoE interface that is used to split the Data and Power carried by a CAT5 cable to the internal equipment and supply 4 volts DC to the cooling fan. The interface includes Lightning Protection and support for normal reverse polarity POE equipment. To supply required current to the equipment and Fan, the HyperLink BT-CAT-P14848 power supply and injector kit should be used. Cisco® PoE equipment requires substitution of a BT-BT-CAT5-P1R4848 kit to supply reverse polarity 48 volts. An optional PoE interface surge protector for a second CAT5 cable.
The NB141207-40F includes a termostat controlled 48 VDC 6W Cooling Fan that is powered via the CAT5 PoE interface. The high airflow, low noise fan used allows air to be pushed or pulled through the enclosure. Filters for both ports are easily removable for claning and replacement. The fan turns on when the internal temperature is internal temperature rises to 120ºF (49ºC) ±5º and turns off at 90ºF (32ºC) ±10º. An optional solid state thermostatic controller is available.
The PoE interface features built in lightning protection. This helps add an extra level of protection to PoE equipment installed in the enclosure. In addition, the unit can accept up to two optional bulkhead-mount N-Type lightning protectors to protect the coaxial cable runs. An addtional PoE interface is available for use in the enclosure.
Fully customized configurations are available.
Applications for the 14 x 12 x 7 inch Weatherproof Enclosure with PoE Interface and Cooling Fan product:
- Remote Wireless LAN WiFi equipment intallations
- Indoor and Outdoor installations
- Hot temperature environments
- Rapid Deployment Installations
- Corrosive environments