L-com / Hyperlink Tech PS4860-POE 

Mechanical Specifications:

• Enclosure: Black 940V0 Polycarbonate
• Weight: 0.7 lbs (0.31 Kg) 
• Dimensions:
  • 5.9 x 2.7 x 1.4 (inches)
  • 150 x 68 x 35 (mm)

Electrical Specifications:

• Connectors: (2) RJ45 Jacks
• Inlet Type: IEC320-C14 w/ground
• Data Lines:
  • Pair 1: Pins 1/2
  • Pair 2: Pins 3/6
• CAT-5 Power Pinout:
  • + VDC: Pins 4/5
  • - VDC: Pins 7/8
• Operating Temperature: 0º C to +40ºC
• Power Supply: 48VDC @ 60W
• Max Current: 1.2A
• Input: 100-240 VAC
• CE and UL Listed: Yes
• FCC Compliant: FCC Part 15, Sub B - Class B
• RoHS Compliant: Yes

Applications: 

• Power multiple POE devices from one power supply!
• Wireless LAN Access Points and Bridges
• Wireless LAN WiFi Amplifiers and Amplified Antennas
• VoIP (Voice over Internet Protocol) Telephones
• IP Surveillance Cameras
• Bluetooth Acces Points
• Web Cameras

Features:

• PoE Injector and Power Supply in one unit
• Integral 48VDC @ 60W Power Supply
• Integral DC Injector
• 100-240 VAC Input
• Dual RJ45 Jacks
• Impact Resistant Enclosure
• CE and UL Listed
• FCC Part15, Sub Part B - Class B Compliant
• RoHs Compliant

Description: 

• The HyperLink PS4860-POE is a Power-Over-Ethernet (PoE) power supply with integral DC Injector. It can provide DC power for multiple PoE-equipped devices by "Injecting" DC single PS4860-POE and provide power for a PoE-equipped access point and a HyperLink PoE ampilfier. It is compatible with AP´s and other equipment supporting the IEEE standard PoE pinout (Pins 4&5 Power + / Pins 7&8 Power -). This unit can also be used with cisco PoE equipment using the optional PoE conversion cable below.
• Since the PS4860-POE is completly self-contained, a separate power supply and injector is not required. The PS4860-POE features an impact resistant polycarbonate enclosure.
• Note: 3-prong datachable power cord sold separately (see below)