L-com / HyperLink HA2401GX-1000
- Transmit Power: 1 Watt (30 dBm)
- Receive Gain: 20 dB nom
- Frequency: 2400 - 2500 MHz
- Max. Input Power: 100 mW (20 dBm)
- Water Resistant Rating (Outdoot Models): IEC 60529 IPX7
- Operating Temperature:
- -40ºC to +50ºC
- -40ºF to +122ºF
- 150 x 64 x 33 (mm)
- 5.9 x 2.5 x 1.3 (inches)
- Current Draw: 1.25A Peak Tx and 0.14A Peak Rx
- Supply Voltage: 12VDC -0.5V / +1V
HyperAmp® HA2401GX-1000 amplifiers are compatible with 802.11g (b/g) wireless LAN equipment. Hyperlink´s Active Power Control circuit automatically adjusts the amplifier´s gain to provide a contant output power reagardless of cable length.
The HyperAmp® HA2401GX-1000 series improves range by delivering full transmit power directly at the antenna where is most effective. In addition the unit´s receive gain compensates for cable losses. The unit can be configured to delivery the full transmit power with as little as 1 mW of input power, permitting cable runs for several hundred feet with no degradation in operating range.
Streaming Media Ready:
WiFi components used in a Streaming Video or Audio system work harder than one carrying Data only. They are turned on for extended periods of time without the chance to cool off. Microwave devices are very sensitive to the heat generated from operating at high duty cycles. Most amplifiers, or for that matter many Radios, cannot pass Streaming Media content for extended periods of time without overheating. Some products were designed for Data only use and have no method of heatsinking. If you use them in a Streaming Media system, those products will self destruct of have their lifespan diminished. It would be the equivalent removing the Heatsink or Fans from your PC.
The HA2401GX model feature rugged, cast aluminum weather-proof construction to ensure years of reliable operation the harshest environments. The integral mast mount gives this amplifier superior strength as well as simplifies installation. Included with the outdoor models, the DC Power Injector provides power tho the HyperAmp® through the antenna cable, simplifying installation. Current-sensing circuits provide remote amplifer diagnostic LEDs. In addition, the unit provides effective lightning protection with multi-strike capability.
The power supply included with the amplifier is rated at 100-240 VAC @ 50/60 Hz allowing it to be used in the US as well as in the EU when used with the optional PSX-EU2 Plug converter (US NEMA 6-15 Flat Blades to EU 4/4.8 mm round pins)